Version 5.4.13.2554

9th July 2014
5.4.13
[NEW FEATURES]
- Updated GMI file parser

[FIXES]
!!ALL GPM SERVER USERS MUST UPDATE THE SERVER
- Server SSL Certificate Error
- Export crash with measurement names containing illegal file characters

5.4.11
[NEW FEATURES]
- File measurements which are classed as 'back' are automatically assigned to the front on non perfecting printers.
- Automatically delete(or move) Image Control bmp or jpg files with the same name.

[FIXES]
- Non integer Paper tolerances saved properly
 
5.4.10
[FIXES]
- Starting a new job resets the front/back selection in the job window
- Changing Language on startup
- A 4cx launching error
- GPM sync timeout error
- Parses certain corrupt SVF1 files
- License server service failure update

5.4.9
[FIXES]
- Adjusting existing Onyx RIP export curves
- Exporting a spot job always uses a Tab delimiter
- GPM Licensing refreshing properly after a server install

5.4.8
[FIXES]
- Critical fix for error which may result in loss of data

5.4.7
[NEW FEATURES]
- Zero paper density is no longer required for Techkon Polarised densities

[FIXES]
- IZLoop SCan.xml file ok sheet support
- SVF2 export crash exporting a cmyk measurement from a spot colour bar
- Sheet consistence scoring error importing SVF files
- Grey balance scoring error with inconsistent paper measurements
- ApogeeX XML export colour order
- Demo mode does not emulate an Eye One Connected.

5.4.6
[FIXES]
- Correct i1 framework for Mac
- Relaxed TVI strip recognition requirement
- Fixed a TVI score error(when opened or synced via GPM) if the paper colour is uneven across a measurement
- Fixed a GPM Synced message when syncing a job which has the same name as a job that exists already at the receiver.
 
5.4.5
[FIXES]
- Fixed a Techkon Polarised density error.
- A 100% spot colour must be defined when When adding a colour to a library.
- GPM license error on some Windows Server 2012 and Windows 8 PCs

All GPM Users - Please wait 10 minutes after reinstallation for the license to reset

5.4.4
- Fixed the ability to select which line to measure in a multiline strip.
- Fixed a server dongle ID reset error for GPM users.

5.4.3
- Fixed a crash using the Makeready / Production Button
- Fixed a GPM Crash

- Fixed exporting a colour bar when using inches.
- Fixed a USB Dongle problem.

5.4.2
[NEW FEATURES]
- Sakurai SDF Closed loop file added

[FIXES]
- Window size checks for GPM mode or running pressSIGN without a monitor.
- 'No dry data' error when using dryback without all 23 default pressSIGN patches.
- CxF2 xsi:nil fix
- inkpaper database error on new install
- better handling of 'activation code in use' error when quitting and changing computers.

5.4.1
[FIXES]
- Onyx RIP Export
- Fixed some user permission errors
- Updated database upgrade checks
- Fixed Production Report measurement count error
- Fixed averaging crash on single strips
- CxF 2 Xsi tag support
- SVF Closed loop file ink unit fixes.
- Adding a single CxF colour to a library
- 'Any' operator job crash
- Managers cannot add Supervisors

5.4.0
[NEW FEATURES]
- More efficient GPM Syncing which checks and syncs only changed or missing measurements in a job.
- New Version check for GPM Client / Servers.
- Minimum version for synching between GPM Clients and Servers is 5.4.0
- Barbieri SpectroPad M0, M1 & M2 Measurements

[FIXES]
- Spectropad Wifi Address does not need to conform to xxx.xxx.xxx.xxx
- Opening multiple jobs syncs them if there is a connected GPM Server to each client.
- Deleting a job whilst it is being synched stop the syncing correctly.
- Jobs show as synched only if the job and all measurments are in sync.
- Improved Eye One Colour Bar recognition
- Add measurements into an already open job fixed.
- Trend imgages may appear black the first time a standard is used.
- Sync button overlaying the job list when using advanced search options.
- NilObject crash measuring repeat colour bars with slur marks.
- Administrator user account error on a new install.
- GPM or Trends License error on a new install.

5.3.0
[NEW FEATURES]
- New Supervisor User level who can view all jobs across sites, but not change anything.
[FIXES]
- Fixed colour selection for non perfecting presses with 8 units or more.
- Fixed display of ink zones for spot colours with tints.
- Fixed display of spot colour slur patches.

5.2.1
[NEW FEATURES]
- Re-Added X-Rite eXact Support for workstation (non Windows Server) PCs
- Added pressSIGN Mobile support for GPM
- Updated Spanish Translation
- Updated Chinese Translation
- Updated Portuguese Translation
- Updated French Translation
- Updated Korean Translation
- Updated German Translation
- Calibration window can be closed without calibrating a device.
- Added Komori Closed loop file format (.CLF)
- EasyTrax / Intellitrax colourbar positions can be set

[FIXES]
- Fixed counting ink zone boundaries which are not printed
- Fixed automatic measurement flopping.
- Fixed calculating a strip after measuring it in single patch mode.
- Simplified X-Rite Eye One driver access on Mac which may stop some random crashes after measuring.
- Cyan only TVI transfer curve displayed correctly.
- Measuring a colour bar in single mode can be done immediately after creating a new job and measuring the paper.
- Fixed editing a standard from the new job window on pc.
- Fixed a paper error when importing CGATS files containing misread patches.
- Fixed a SVF 1 import error reading densities for paper.
- Grey balance preview when creating a new standard from an ICC profile.
- 2 pass presses with less than 8 units are previewed correctly.
- Fixed a crash where the user documents folder was not writable.
- Reduced window flicker and time to open a job.
- Fixed SVFv1 file date import
- Fixed ok sheet view for perfecting presses.
- Fixed Polarised Density from a SpectroDens.
- Fixed Cancelling naming an edited standard
- Fixed deleting jpg, bmp & tvf files from hot folder

5.2.0
[NEW FEATURES]
- pressSIGN Global Print Management(GPM) Cloud based server.
- Automatically sync measurements and jobs across multiple servers.
- Jobs can be sent from printer to print buyer automatically.
- Export CMYK and spot tone curve XML adjustment file for inkWIZE AutoCurves 3.5. This file type has no colour limit per file.
- New look open Job / Search Window
- Updated online reports
- Closed loop TDF file generated as soon as a scan is started.
- (Windows) Application Changer to quickly swap between pressSIGN and other full screen applications.
- Ink zone counting handles colours not used in a job.
- Added support for older jdf closed loop files
- Globe icon is shown when a measurements and jobs will be sent to a GPM server.
- Techkon measurement devices now use the recognition window if a colour bar is not set in a job. Removed patch width setting from the configuration window.
- Added supported for X-Rite 530 firmware db26
- Initial colour bar preview and messages respects ink assignments for job
- New Web summary report which lists presses on sites by their performance. Displays performance of Primaries, Spot, TVI, Grey, Paper and Sheet Consistency for each press. 
- Added Support for Babieri Spectro Swing on USB and Spectropad on USB and WiFi both on Mac/PC
- Added Rendering PDF & EPS Softproof support on Mac
- Added Rendering PDF & EPS Softproof support on PC if Ghostscript is Installed

[FIXES]
- Fixed a Production measurement timing error.
- Fixed adding spot colour tints to an existing job.
- Mixing a spot and scanning devices display measure messages more clearly
- Updated rebuild database to also check for added database tables.
- Standards that use a single dot gain or single grey balance target are scored and displayed properly.
- Updating Esko TED XML Files Fixed
- Temporary Removal of eXact support.
- Fixed saving colour bars with spot slur marks without a spot solid.
- fixed some apostrophe verification errors
- Fixed a spot only colour bar ink zone count problem.
- Updated Techkon Device Service and drivers to 1.6.1.6
- Fixed a Techkon Polarised paper measurement error
- Fixed a techkon error giving 0 L value or no patches due to a difference in localisation between pressSIGN client and device service
- Fixed a database error on upgrades from pressSIGN 4.6
- Grey balance targets are calculated consistently when using a target without 4CX capability
- Fixed delta E inconsistency when using a standard which did not use deltaE 2000 for spot colours.
- Fixed 4cx capability for ISO 12647-2 Coated White Backing targets
- Fixed automatic cmyk paper white adjustment changing or resetting throughout a job.
- Fixed duplicate login error are a new install
- Fixed a spot tint scoring error
- Fixed crash related to use of quote marks in a standard
- Fixed a patch / ink zone count for longer measured bars
- fixed ink zone in use saving / loading
- X-Rite 530 spectrophotometers no longer auto connect when the configuration window is opened
- Scanning only measuring devices do not prompt the user to measure paper
- Fixed error writing a .cbl file with spot tints when exporting a colour bar
- scanning a colour bar with colours missing
- Barbieri Wifi Fixes
- Spectropad patch-size issue fixed

5.1.3
[NEW FEATURES]
- Image Control 5 files, when parsed, will automatically add spot colours to the job and a custom library.
- Spot only Image Control measurement files parsed correctly.
- Implemented Agfa Apogee 7/8 XML update existing curves with spot colour support.
- Added PDCS-I and ATS file support.

[FIXES]
- Fixed kicking out other users with the same login. This also solves a 2 users logging in error after multiple crashes.
- The minimum score for a solid green can now be set to 100%
- You can have a single tolerance for the CMYK primaries.

5.1.2
[NEW FEATURES]
- When Creating a new job with a known colour bar, the summary and full strip preview shows the colour bar.
- The main window view is remembered between launches.

[FIXES]
- Fixed various Japanese Language PDF and web report font issues
- Logging in as a manager / operator during an initial install sets the site properly.
- Toolbar is hidden by default on monitors less than 848 pixels high during install.
- Non measured patches in colour bars are output in CBL files.
- '2 users logging in' can again be cleared by entering 'logoutusers' (without quotes) as the username and a valid activation code
- Eye One contrast bars are also added for ignored patches.
- Fixed a crash when creating a colour bar when adding an 'ignored' patch before a solid C, M, Y K or spot patch.
- pressSIGN handles files where a printed dot measures 0
- Fixed deleting spot tints from a colour.

5.1.1
[NEW FEATURES]
- Added support for Large ICCprofiles and implemented support for full ICC profiles spec 4.3
- Adding a colour bar automatically selects the standard already selected.
- Arrow keys cycle through tabs on the main window.
- Repeat colour bars start at an ink zone boundary
- Older pressSIGN standards (v3, v4 & v4.5) can be deleted if they are not used in a job.
- Updated Server dongle driver for Windows 8
- Spot tint ramp preview.
- Specify the zone boundary patch for colour bars.

[FIXES]
- Added X-Rite eXact driver to installer.
- zone centring error when using full strip view.
- Patch size calculation error using a scanning spectrophotometer.
- PDF Manual chapter mis numbering.
- Mid tone cyan tint reported incorrectly in PDF measurement report
- Handles spot colours with periods (.) or brackets in the name when importing SVF files from PDCS-II or X-Rite Intellitrax/EasyTrax
- Resolves CMY grey balance calculation of 0,0,0 when creating a new standard from an ICC profile without a grey balance profile.
- Fixed creating a job for 'Any' Operator.
- Intellitrax SVF files Cyan ink recognition fix.
- TVI and trap values not shown or scored for patches without a measured solid or paper.
- Production PDF files show the averaged measured TVI curves.
- Intellitrax Grey CMY and spot patch fixes
- Image control txt filename works for CPC24 and Imagecontrol 5 files. Now has press name, job name, colour bar name and sheet number.
- Adding or Editing from the job settings winow dos not reset other options.
- EasyTrax / Intellitrax dll driver checks updated.
- Ink zone numbering on colour bars beginning with a black patch.
- EasyTrax / Intellitrax colour bar recognition patches missing at either end.
- Multiple hot folder files should be imported in time order
- Fixed crash related Text encoding error on Intellitrax / EasyTrax SVF and Image Control CGATS files
- PDF Production timings reported correctly
- Corrected deleting client error message
- Stopped Chat window opening with messages from 'Any'
- Various speed improvements in New Job and Job Settings windows when adding/deleting settings.
- Sharper text in TVI images.
- Production measurement count correct for current active job.
- Multi Site Company name shown in labels / reports.
- logoutusers now works again to reset two users logging in error
- Server connection errors shown in set sefaults window.
- Patch size when export a colour bar
- CBL files include non measured patches in colour bars

5.1
[NEW FEATURES]
- Spot colour tints in pressSIGN PRO and pressSIGN Trends
- Spot colour tints can be added via file, measuring or manual Lab entry
- Full colour preview of spot colours and tints showing Lab, TVI and blend.
- Jobs can be allocated to categories and sub categories
- Web browser reports. See score/performance breakdown for a set of jobs in a web browser (server upgrade).
- Selecting front/back from the job window automatically updates the full strip view
- Selecting front/back from the full strip view updates the measurement list in the job window.
- Summary Screen strip preview shows average of all individual patches, not just a default pressSIGN strip
- The Open Job window can show only jobs which have measurements in them
- Create spot colour adjustment curves for inkWIZE autoCurves, Esko PressSync & Agfa Apogee
- Colours assigned to different units can be dragged into different positions to swop the colour allocation
- When choosing a spot colour, the last used spot colour library is selected.
- Importing multi colour Intellitrax and Komori SVF Files
- Summary screen shows the average of all individual patches in a strip.
- Viewing 'All' TVI curves only shows colours in use
- Create spot curves to be visually linear.
- Create new spot colour targets from a measurement in a job.
- Esko TED curve output style with CMYK and spot colour support
- New report type - Scoring Report (Production Mode), designed to be given to clients and shows all scoring measurements whilst in production mode
- Added support for older GMI files containing CONTRAST patches.
- Support for X-Rite eXact Spectrodensitometer
- More consistent layout for job settings and new job window
- Job settings and New Job windows show a preview of the colour bar and inks used in the job
- Measurements now fail if there are too many errors measuring a colour bar
- Disabling ink zones usage changed. Now click the 'Disable Ink Zones' button, enable / disable zones, then click the button again to confirm
- Paper measurement for Techkon devices is only required for polarised measurements.
- The main window remembers the sizing and maximised state between launches

[FIXES]
- Fixed a crash selecting 'single' when creating a colour bar before any patches have been added
- Adding/delete spot colour libraries immediately updates the library lists.
- DI Scan.xml files name multiple spot colours correctly
- Techkon SpectraJet problems measuring single non repeating strips
- Techkon SpectroJet Serial number saved with a job.
- spot tvi preview moving from one job to another
- fixed spot labels when measuring a spot colour bar in single patch mode.
- importing spot colour libraries with both spectral and non spectral values in it.
- Names of operators, presses, standards etc are case insensitive.
- patch contrast bars align properly when exporting an EPS or PDF
- X-Rite EasyTrax / Intellitrax driver & device choice fixes.
- Much quicker opening Job Settings and New Job Window
- Exporting a colour bar .it8 file includes whether the strip is a single or repeat style bar
- Single Strip colour bars do not remove paper patches from the ends of the bar
- The colour bar for a job is shown even if it has been deleted in the database
- SVF import of a spot tint which is not used is handled correctly

5.0.7
[FIXES]
- Fixed a measuring crash when the colourbar is set to 'Any'
- Popup Trend windows always update automatically when measurements are added
- Ink views for a 2 pass press

5.0.6
[NEW FEATURES]
- Parse Digital Information InkZone Move Files
[FIXES]
- Fixed a few pressSIGN 4.x to 5 upgrade errors

5.0.5
[FIXES]
- Techkon device type configuration and refresh
- Sequence Error adding colour bars
- Colourbar database error
- Zone Changes on black

5.0.4
[NEW FEATURES]
- Dryback settings can only be overwritten by administrators or managers.
- Sheet consistency score is only applied whenever a solid appears more than once in a measurement.
- Optional Preference to automatically start 4cx calculations.
- Imported or created colour bars which have gray balance patches (named GBH, GBM, GBS - Gray Highlight, Grey Midtone, Grey Shadow) override grey balance patches in the target standard when used in a job.
- TVF Files are moved/deleted from hot folder
- Single line colour bars can be designated as single (non repeating) colour bar. This turns off any error correction and is useful for single line specialised colour bars
- Mac version correctly signed for use on OSX 10.8 Mountain Lion.
- Updated measure / calculate messages when opening/loading a job with a known colour bar.
- Faster opening of new job window
- Faster Saving of measurements with many patches
- Techkon Spectrodrive and SpectroJet do not strip any paper patches from the end of non repeatable colour bars.
- Exporting a colour bar automatically selects site/press/standard/type from the job settings or new job window.
- Measuring a multi line colour bar checks that every strip has been read before enabling the calculate button

[FIXES]
- Removed non functional 'Reports' button from open job window
- Patch size can be set for Techkon devices
- Various non ascii character fixes for sites/standards/papers/clients.
- Extra ampersand showing in client combobox when creating new job.
- Editing a Custom standard fixed
- Out of Bounds Intelltirax Error on some colour bars
- Colour bar selection reset when adding or editing other options in the new job window
- 'CBR' and sheet size related Intellitrax Errors
- Inkzones are only counted from solid black patches, or repeat of other solid patches.
- tolerances and scores are updated correctly when editing a standard.
- softproof 'init_previews' crash
- Importing measurements from a hot folder which do not have an internal time stamp are imported by modification date.
- Press ink zone width saved correctly when using inches.
- Colourbar cbl files correctly generated with spot colours
- Custom strip labels displayed properly on screen
- Ink Zones not flipped even though the press configuration was set to flip front / back
- Database error when logging in as operators that begin with 'USER' (pressSIGN server update)
- Chat window crash (Out of Bounds)
- Username in login window losing focus
- Multi line EPS and PDF colour bars are not reflected vertically when generated
- Closing the login window without logging in does not leave you as a 'ghost' user without priviliges
- Clicking 'Scan' from the full strip view correctly resets the patch width for a Techkon SpectroDrive
- Scanned slur patches are properly shorn as slurs onscreen, rather than an ignored patch.
- Updating/Exporting extra grey balance tolerances
- Importing older (v5, v4.5) standard
- beta fix techkon patch sizes for built in colour bars

5.0.3
[NEW FEATURES]
- 'Save As' option for standards

[FIXES]
- Use of Ampersand (&) characters in sites, standards, ink & papers, presses, Operators and customers
- Error correction/recovery for measuring a colour bar had been turned off
- Edited Standards dissapearing from popup menus
- Crash clicking on the patch list when creating a colour bar before any patches have been read.
- Colour bar patch width and height honor international decimal points
- Selected measurement unit is remembered

5.0.2
[NEW FEATURES]
- Improved recognition of multi line colour bars
- PDCSII/Intellitrax measurement names are now PROJECT_JOB_SIDE_SHEET

[FIXES]
- Dryback calculation error
- Database Upgrade mid/shadow tone TVI tolerance reset.Customers who had custom TVI tolerances can either restore their 4.x database and upgrade again (losing any new jobs since the backup),accept the new default of 4% & 3%, or edit their standard
- DeltaE always shown in the Lab/Density spot measurement panel
- Lab/DeltaE Panel no longer has a Lab value of L 0, a 0, b 0 when first shown
- More Demo database upgrade/restore fixes.
- Add standard window closes automatically after a new standard is added
- Primary delta E shown in red when outside tolerance
- Full Spot Colour name shown in PDF reports
- Spot patch possibly shown incorrect preview colour in PDF
- Removed unnecessary error message after measuring the last line in a multi line strip
- Mis-measured patches still had dryback applied which made then active again
- Wet and Dry Lab values shown when mousing over the full strip
- Mis-measured solid patches are not checked for closeness to target.
- MouseMove crash when updating ink zones on multi colour jobs
- Window graphics corruption when restoring the main window on PC
- TVI Curves in a measurement PDF are on a new page on jobs with many colours
- Print Contrast value in PDF Reports are only shown when available
- Fixed a paper a value tolerance error for built in standards
- Display of summary colours on smaller monitors
- Consistency calculation for non neutral blacks corrected for adding/opening a job
- Fixed a caching problem on PC
- Database error on new install

5.0.1
[FIXES]
- Layout of Exported spot colour measurement files
- Opening multiple jobs with different colour bars preserves individual layouts
- IP Address and Activation code fields in the activation code window are always available if a server goes offline
- Changing the Spot slur patch in colourbar creation window fixed.
- Fixed some site deletion errors (MSIS)
- Fixed License check if the user logged in too quickly after launching
- Reset closed loop file location on opening a job
- Fixed several closed loop file errors/crashes
- Fixed a demo login error
- demo users are no longer asked to create a new site.
- Embedding colour bar in a job fixed if the bar had been renamed
- Crash measuring more patches in a strip than were in a single multiline colour bar.
- Job name duplicates are auto numbered per site (MSIS)
- Softproof re-enabled in pressSIGN Trends

5.0.0
[NEW FEATURES]
- Measure from 1 to 16 colour jobs.
- Measure multi line colour bars.
- Automatic adjustment of target Lab values based on paper.
- OK sheet.
- New production mode scoring shows delta E to OK sheet.
- New spot colour delta E formulas.
- Specify ink units and colours per job.
- New press types added (Digital Printer & 2 Pass).
- Multi Site Internet Server Version (MSIS) available.
- New manager level user with complete control of a single site(MSIS required).
- Administrator level can add/edit additional sites (MSIS required).
- Allocate presses/jobs/operators/colourbars/clients/spot colour libraries to be global or belong to specific sites (MSIS required).
- New client user who can log in and only see jobs which have been allocated to that client (MSIS required).
- Chat enabled from client to manager or administrator for a specific job (MSIS required).
- Colour Bar import from CGATS layout files.
- Add custom colour bars containing up to 16 colours, including slur and non measurable(i.e. image) patches.
- Custom colour bars can contain any number of individual tints
- Live update of remote jobs.
- Live update of remote measurements.
- Quicker softproof updates.
- PANTONE+ Spot Libraries updated with 336 new colours
- Enable / Disable specific ink zones
- Generated Colour Bars have the colour bar name label

4.7.0
[NEW FEATURES]
- Admin rights are required to overwrite existing dryback data
- New colour bar recognition system
- Improved Magenta ink adjustment formula
- Automatic syncing of presses/targets/dryback data across multiple clients.
- Minimum Patch sizes shown for supported instruments shown when creating a colour bar.

[FIXES]
- Potential Database error adding a standard

4.6.6
[NEW FEATURES]
- Smaller Barbieri LFP Chart. Now there is room for your own imagery
[FIXES]
- Correct identification of front/back from image control files

4.6.5
[FIXES]
- Small strip with 2 spot colours recognition improved
- Adding Individual Spot Colours
- Viewing multi colour jobs without ink zones

4.6.4
[FIXES]
- Error Restoring a database
- Intellitrax Calibration Error

4.6.3
[FIXES]
- Fixed error in closed loop SVF file format
- Fixed Cyan transfer curves showing as linear

4.6.2
[NEW FEATURES]
- Softproofing available as an addon module for pressSIGN PRO
- Softproof TIFF Files against Target & Target adjusted for measured paper
- Softproof measured press sheet with and without curve adjustments
- Softproof measured press sheet with ink zones.
- Softproof difference between 4CX and TVI adjustments.
- Use Softproof Module to compare two different previews next to each other.
- Barbieri LFP Support
- Increased speed of opening longer jobs
- General refresh speed enchancements
- 'Show PDF after generation' preference also applies to all other exports (curves etc)
- Import individual spot measurement files into a job
- Faster screen refresh on windows.
- Dual web press type support
- Closed loop files show W1/W2 for Dual Web
- X-Rite Measurement scanning direction Support
- 4CX adjustment curves automatically calculated
- View 4CX and TVI adjustment curves on main screen.
- Korean Language Support

[FIXES]
- Using Single Measurement Lab/Density redraws the compared colour correctly.
- Flopping inconsistencies and ink zones
- Memory Leak on Windows.
- Dryback applied correctly when double clicking on a single measurement in the job window
- 'Refresh' button in job window does not add measurements twice
- Progress window not closing if the hot folder contained files it could not import - e.g. folders or text file with different tints.
- Fixed a crash changing language after a new update install
- SVF Closed loop ink name always use english for colour names.

4.6.1
[NEW FEATURES]
- Ability to specify whether a colour bar is flopped(reversed) for the front/back, or top/bottom of a press
- Automatically flip a measured colour bar if it has been imposed incorrectly
- Improved full strip view when averaging long and small strips
- Ability to configure a 16 colour press
- Installer keeps trying to detect a server after the user unblocks the firewall.
- Scan button available in full strip view for devices which work on a track (EasyTrax, Intellitrax & Techkon Spectrodrive)
- Automatic closing of Colour bar recognition window after success
- Perfecting or double sided presses include the side in measurement names.
- EagleRIP Curve Export

[FIXES]
- Duplicate license code error if one was used on the server machine.
- Intellitrax debug mode
- SVF Closed file Export 5/6 colour bar with 4 colour job.
- Fixed software lock when averaging full strips which have many mis-measurements
- Handling of Intellitrax error codes improved
- Generating a SVF closed loop file for a 5/6 colour bar in a 4 colour job
- OutOfBounds error using the colourlist in the measure window
- NilObject crash using PC installer from CD
- Browsing for an ICC profile on windows should not be obscured
- Unit numbers for presses set to Top/Bottom always number from 1
- SVF Closed loop files list all colours in use.
- Handles measurements with a Lab value of 0,0,0 from devices
- Intellitrax Files import Scan time fix (12 AM & 12PM).
- Intellitrax Flopping fix
- Patches missing error opening jobs generated before 4.5
- Installing as demo user.
- OutOfMemory Exception waking from sleep on PC

4.6
[NEW FEATURES]
- Grey Balance correction curves using 4CX technology.
- Grey Balance target is shown in reports
- New Styles of colour bar including an extended 4CX layout
- Charts measured without ink zones can be shown in full window mode
- Local cache saved for standards which improves loading speed for jobs with ICC profiles.
- Delta E CMC 1:1 Implemented
- Generate a 4CX style colour bar
- Inkzone values are written in exported measurement files
- Full strip view has colour patch labels
- Print Buyers can now see measured density values on main screen
- New PrintFlow & Rutherford closed loop(SVF) support in pressSIGN PRO
- Ink Unit Colour Specification and graphics when adding a new press
- Minimum width of colour bar which has to be printed is always shown when generating a new bar
- New full strip measurement averaging which matches a path to a zone.
- Caldera RIP curve export
- X-Rite Spectro Eye Direct Serial Support

[FIXES]
- Automatic unzip for PC version fixed
- Eye One contrast bars in colour bars align properly to each patch
- 6 Colour job export/import
- Fixed some PDF syntax errors in generated colour bars which should make them more compatible with prepress systems.
- Changed Server to run under LocalSystem user on Windows
- Database Server user hidden in login window on Windows 7 64 bit.
- Long colour bar recognition measuring right to left.
- Eye One Serial number recorded for each measurement.
- Editing Presses/Standards/Operators does not reset menus in the Preferences window.
- BETA FIX - New 4CX Colour Bar in 4.6.0.1464 removing duplicates
- Fixed changing TVI values after importing an ICC Profile
- Fixed Calibration / Connection for Direct Intellitrax connections
- BETA FIX Mac crashes
- BETA FIX Calculate strip is only a SpectroEye is connected.
- BETA FIX Editing a standard and adding an ICC profile database error.
- BETA FIX Measure paper window auto closing and reopening if a paper measurement was done just before it opened.
- pressSIGN remembers the ink and paper used after quitting/relaunching.
- SpectroEye Crash on first launch
- If there is only 1 administrator, that operator cannto be deleted or changed to a standard
- Fixed creating a new user on first install with no original database

4.5.2
[NEW FEATURES]
- Revised Default Standards for 4.5(The names end with 4.5), The default grey balance patches have been updated. pressSIGN v3 and v4 standards are still compatible.
- Updated pressSIGN Mobile
- Ability to generate Production Reports for Demo pressSIGN users
- Cyan TVI curves are drawn last as are more visible than yellow.
- Colour Bar recognition window closes and a measurement is added if the recognition succeeds for Xrite devices.
- Toolbar is updated during a first install with available summary/trend/strip options.
- The Main Window Title Bar displays current license.
- Measurements are always numbered uniquely when changing from front to back
- Operator / Press List / Ink & Paper menus are sorted Alphabetically
- Ability to configure external measurement devices during a first install.
- Auto Server Discovery favours servers where the dongle is plugged in.

[FIXES]
- Dongle Not Found / Server USB Dongles work on Windows Systems with Terminal Services.
- Installation and configuration of pressSIGN Server on some Windows XP configurations improved.
- Autorelaunch Server on Mac
- Server crash when a user logs out whilst a popup menu is selected
- Recognition on an EasyTrax/Intellitrax of a flopped colour bar.
- Database IP entry on double byte languages
- Changing tints from built in standards updates the adjustment curve correctly.
- Adjustment curves calculated correctly when using tints with uneven distribution from 0-100. e.g. 10, 40, 80. However, 25, 50, 75 & 20, 40, 80 & 10, 40, 70 all worked.
- Exporting 6 colour jobs correctly adds second spot colour.
- Generate Production Reports from pressSIGN Trends.
- Hot folder import (4.5.2 beta fix)
- Add spot colour library database error.
- Spot colour density is shown in full strip mode after averaging measurements
- Losing connection to the database only opens the database location window.
- Comments read icon fixed.
- Intellitrax measurements without paper are correctly disgarded.
- Valid Activation codes checking improved.
- Improved Detection of EasyTrax/Intellitrax drivers during a reinstallation.
- Open Measurement window after successful colour bar regocnition (4.5.2 beta fix)
- Opening a job which the target has different tvi points updates the interface correctly.
- Fixed crash/lock if an Intellitrax directly connected to pressSIGN reported a certain errors.
- Averaging measurements when more than one job has been opened with all measurements calculates the target density correctly.
- Disconnect and Reconnecting to EasyTrax/Intellitrax without restarting software.
- Changing press style from one job to the next updates the choices of non perfecting, front/back, top/bottom correctly.
- Added a delay in launching pressSIGN Server after a restart in Windows.
- Default Built-in Standards cannot be deleted.
- JDF closed loop Makeready/Production parameter fixed.
- Minimum density reset when creating a new job with a different ink/paper
- PostgreSQL configuration file fixed on Mac to give full network access.
- IPv6 configuration removed from config file.
- Fixed Windows Installer errors

DUE TO A CHANGE IN SERVER COMMUNICATION, PRESSSIGN SERVER AND ALL CONNECTED CLIENTS MUST BE UPGRADED TO VERSION 4.5.1 OR LATER

c4.5.1
[NEW FEATURES]
- New Installer Technology which can automatically detect a pressSIGN Server and change installation options accordingly.
- Connecting to a new database IP resets the standard to the default ISO 12647-2 Coated Black Backing v4

[FIXES]
- Server / Client messages work in all languages.
- The job list automatically updates the job list as options are changed without the need to press 'Refresh'
- Possible server crash when closing a mobile session while a popup window was open
- Connection problems with XRite Intellitrax/EasyTrax
- Database upgrade from version 3 to 4.5

Version history
4.5.0.1328
[FIXES]
- Fixed Chat crash if there is a disconnection to the server
- Fixed Lockup when importing a Colorport 2.0 CGATS File.
- pressSIGN Mobile screen alignment on iOS

4.5.0.1328
[FIXES]
- Hot folder import Fixed
- Possible crash on launch loading unsupported device drivers
- Fixed server crash using pressSIGN Mobile if a browser window was closed or quit whilst a login window was shown
- Fixed Chat crash in pressSIGN Client

4.5.0
[NEW FEATURES]
- Direct X-Rite Intellitrax support in pressSIGN PRO. The colour bars supported can be any bar available from the colour bar generator in pressSIGN.
- When measuring a strip where the device is moved over the edge of the paper, any start and end paper patches reported by the device as real patches are automatically stripped.
- Opening a CMYK only job which used a spot colour bar is much quicker.
- When adding a standard from an ICC profile and a measurement is open,the custom paper white is automatically set to the measured paper Lab value.
- pressSIGN Mobile - Remote Job viewing and chat.
- Single Dongle on server.

[FIXES]
- Italian Translation fix in Open Job Window.
- Dongle install launches correctly on Windows if it is the only installation selected.
- Demo version can generate a multi page production report
- Changing Language supports Windows UAC.

4.1.5
[NEW FEATURES]
- New 7 patch per zone 6 colour bar
- New 8 patch per zone 6 colour bar
- Changing press in when generating a colour bar automatically changes the layout to one which matches the number of colours.
- Creating a colour bar lists the same styles as available when using an EasyTrax
- Database Rebuild command. Updates all scores and timings in the database to make sure they are current. CAN TAKE SEVERAL MINUTES (1-30MIN DEPENDING ON SPEED AND SIZE OF DATABASE)
- Loading/Exporting and Updating Jobs shows a progress window

[FIXES]
- English Unicode/Non Alphanumeric Text Entry on Mac
- Editing a press updates the name in the preferences window
- Editing a Standard which has no ISO Target Curves
- Checks before restoring a corrupt backup
- Changing database IP address during client installation refreshes the standards list from the new IP address.
- Visual C++ Error on pressSIGN launch when installing was done on a slow computer.
- Possible Out of Bounds Error adding a measurement in the job window.
- Job corruption (spot colour gets added) when changing from a job with spot colours to one that doesn't and then updating (and saving) preferences.
- Interface is disabled whilst Loading/Exporting or Updating a Job which stops various update problems/potential crashes if another operation is started.
- Opening a new job after closing the job window resets the measurement list correctly.

4.1.4
[NEW FEATURES]
- Generated colour bars can be centred(default) or left aligned.
- JDF Closed loop files(for InkZone Loop) are generated after any measurement has been added, not just measurements in a new job.
- JDF Closed loop folder is set in preferences(moved from new job window) and is remembered between launches, so works for jobs created for other users.
- Windows installer detects whether a pressSIGN database server can be found on the network and installs it if either one cannot be found, or there is a database on the same computer.
- Windows installer now has support for servers installed on computers controlled by a Windows Domain.
- Server installer does not need to be installed from an administrator account on Mac, or PC. Admin rights are required to authenticate the install still.
- Grey balance targets are scaled from measured paper white to target black. Solves a problem where the grey balance scored poorly if the paper colour was not that close to the target even though the patches would look neutral.

[FIXES]
- Fixed a lockout when trying to restore/backup a database with users already logged in.
- Fixed a header tag error when exporting a CGATS file with spectral data.
- Calibration Error on new Eye One devices when performing a spot or paper measurement.
- Connecting to EasyTrax on PC for some upgrades.
- Full strip view showing an extra spot colour for long strips what contain a solid CMY patch.
- Typing in a Lab value for a compared colour updates the preview as the value is typed.
- Tab order fixes in add standard window.
- Fix possible library errors on launching after upgrading pressSIGN versions on Mac & PC.
- With a job open, if the standard is changed to one which the tints/grey balances were different the job will reload if the standard is changed again to one with the correct tints.
- Fixed 100% CPU usage when the add standard window is open
- Fixed changing the paper Lab value when importing an ICC profile where the b* value was not changed if the field was not tabbed out of.
- Short repeat bar shows separate ink zones.
- Fixed incorrect estimates shown on measurement PDF report when density preference is relative to paper.
 
4.1.3
[NEW FEATURES]
- Export PressSync Curves
- Run Length is no longer compulsory
- Colour Bar Generator has a press list to automatically fill in zone widths and size
- Delta E 94 available
- New 4 Colour (CMYK) 5 patch per zone colour bar.
- Reset Track Length on a Techkon Spectrodrive.
- Eye One Contrast Bar width is dynamic depending on the patch width and is wider by default.
- EasyTrax Colour Bar Recognition. EasyTrax no longer requires any contrast bars and can measure narrower patches.
- Operators can view job comments after opening a job. There is also an indication whether the comments have been read.
- Export the colour list from the measurement window

[FIXES]
- Target curves are updated correctly when changing standards in an open job from preferences.
- Fixed a database password error upgrading from pressSIGN 3 to pressSIGN 4.
- Exporting then importing a spot colour library pressSIGN correctly adds the library name.
- Window backgrounds on Mac 10.6
- Fixed a crash when measuring a small strip in single mode, after getting a unrecognised/failed strip measurement.
- Non Perfecting Presses are automatically designated as 'Front' for closed loop purposes.
- Job Score updating correctly when permanently removing measurements from a job.
- Framework error when updating from pressSIGN version 4.0 on Mac
- Newer jobs without comments display 'no comments found' in open job window.
- Adding a press respects localised length setting(in/mm)
- Cancelling during logging in, or whilst kicking another user quits pressSIGN and clears '2 users loggin in' error.
- Editing a standard correctly updates the tolerances
- Typing into the activation window when a user changes license as apposed to pasting works.
- Searches in the Open Job Window which include times that run up to or past midnight (for instance 20:00 - 08:00 ) work.
- Full strip view shows spot colour ink zones correctly from opened jobs
- Chenging sides between front/back/all on a perfecting press where one side has no measurements reloads the job correctly.
- Reissue of 4.1.3 to fix crashes on PPC Macs.
- View Comment icon on Mac.

[FIXES SERVER]
- Server can be auto discovered on PC servers.

4.1.2
[NEW FEATURES]
- Grey balance display / target and scaling are totally based on the target black L value.

4.1.1
[NEW FEATURES]
- Front / Back press sheet support for trend and curve analysis. Select only front, back or all sheets.
- Import CXF1, CXF2, CXF3 Spot Colour Libraries.
- File imports are based on the internal measurement time of the file, not the modified time.
- Faster Launching.
- Job durations and makeready times are set from the measurements, not local time.
- Slight change to Spot Colour density adjustments
- Double clicking on a measurement in a trend window changes view to either full strip view, or summary depending on whether the measurement has multiple zones.
- Short strips with spot colours now display in the full strip view.
- Adding Spot Colours just sets the spot colour popup menu, leaving the search area blank so you can still see the full spot colour list
- Newer score display icons
- Faster Opening of the open job window
- Makeready and Production values are included in exported/imported jobs.
- Faster adding/deleting spot colours libraries and colours.
- Production PDF reports with large number of measurements have the score/comment headings on each page
- All timed Trend Production PDF reports draw Production marker
- Improved accuracy of smoothing algorithm for adjustment curves.
- New Virtual Keyboard Viewer launched from the Help Menu.
- Jobs with no time information do not show any job duration/makeready times.
- Auto Relaunch after changing Language
- Backups are sorted by date and show company, date and size information on restore.
- Faster checks of Server IP address
- Hot folder files which do not import (missing patches, or wrong file type etc) are added to a list of files not to import to stop the error being reported constantly.
- New CMYK 7 patch per zone layout.

[FIXES]
- Mac pressSIGN Server IP connection range fixed (Could only connect to local server)
- Windows Taskbar Icon
- Added spot colour libraries are available in the measure window.
- Fix for target spot colour changing to the average for the job.
- Editing Standards TVI Changes.
- Editing Standards Custom Curves.
- Editing Standards with tints other than 25,50 & 75.
- Editing Standards made from ICC Profiles.
- Editing Standards where optional tolerances may reset the scores.
- Mac Colour preview correctly uses the monitor profile.
- Opening a job with no measurements does not set the duration and makeready times to a large number.
- The Job Window disappearing after a job creation on databases which have had operators deleted.
- Job window appearing when logging out.
- delta E showing 0 for spot colours in full strip view
- Front / Back correctly loaded from pressSIGN CGATS Files
- You can no longer maximise the job window covering the screen.
- Reloading jobs will always be sorted by time.
- Backup on PC from clients without the database also installed.
- Several pressSIGN 3 to pressSIGN 4 database upgrade errors fixed.
- The Front/Back button is automatically updated when a measurement is added.
- Base tolerances correctly imported and exported in Standards
- Paper measurement is still valid after a preferences change.
- Creating new operator during install
- Import and exporting targets made from pressSIGN 4.
- Correct CMY Curve selected when editing a standard imported into pressSIGN 4
- Changing Language on Mac requires Administrator Privileges.
- Saving/Using Queries using the time of day
- Fixed possible Eye One Plugin Error on Windows
- Possible large delay/crash when adding a new spot colour.
- 6 Colour preview text scaled properly in full strip view
- Restoring a database is possible when if you had open a job from another user.
- JDF Closed loop ink zone information

4.1.0
[FIXES]
- The Activation Code field in preferences now takes text input from left to right
- Any Administrator not only the 'presssign' user can restore a database 
- CMYK TVI custom curve data is now displayed when a standard is being edited
- Clicking 'Refresh' in the Job Window does not clear out measurements temporarily from the list

[NEW FEATURES]
- French Translation
- Updated Spanish Translation
- EasyTrax always asks for a paper measurement for each new job.
- New Closest Spot colour mode. Measure any colour and get the closest range of spot colours from any library.
- Editing Standards is now possible. 
- Reduced Interface flickering on Windows.
- CXF3 Colour Library Import.
- Faster screen updates.

[FIXES]
- Uploading jobs to pressSIGN Online on Windows for clients without pressSIGN Online Account IDs.
- Spot Colours use deltaE 2000 after measurement
- 6 colour measurement and production PDF files alignment.
- Spot Colour delta E value = 0.0 in PDF
- Encoding problem generating PDF files.
- Occasional Failure Deleting measurements from database
- NilObject Exception in new job window loading Spot Colour Libraries
- Grey Balance deltaEab target updated to scale correctly from white to black
- Exporting adjusted HP Indigo curve crash. 
- Dot Area CMYK Solids set to 0 density.
- Restoring company name and details after backup
- Crash Creating a new job on MacOS 10.5
- Dot tolerance graph drawn incorrectly.
- Pasting activation codes ignore any return codes
- Glyph Missing errors generating PDFs
- Possible Out Of Bounds error opening multiple jobs

4.0.3
[NEW FEATURES]
- New Spot density adjustments for JDF closed loop export.

[FIXES]
- Creating new standards using custom or non ISO TVI Curves
- Some Windows layout problems moving the toolbar
- Nil object crash on Windows.
- Automatic Unzipping of update on Windows
- Spot Colour Consistency score and special filter density error on 6 colour jobs.
- 2 user log in error when logging in after a crash.

4.0.2
[FIXES]
- Calculate button dis played correctly
- Uploading reports to pressSIGN Online Nil Object Fixed on Mac
- Client pressSIGN Online ID warning when uploading
- Login/Calibrate/Paper/Spot windows show correctly on PCs with multiple monitors
- Full strip ink adjustments show dryback corectly.
- Paper tolerances set correctly when adding a standard with a localised decimal point

4.0.1
- Improved ink adjustments for spot colours.
- Generate JDF Ink adjustment file for closed loop systems

4.0.0
- PANTONE Spot colour Libraries
- Ink Control for 4,5 & 6 colour jobs
- Create short and full strips with 4, 5 or 6 colours.
- Send email pdf report directly from pressSIGN
- Conistency Check and scoring for full press sheets
- Create spot colour Libraries
- Import spot colours from libraries, by measurement, or by typing a Lab value
- New multi user/multi platform database
- Complete server / client platform
- Submit production reports online for clients.
- Admin users can create jobs for other users.
- Unallocatied jobs are highlighted in the 'Open Job' window.
- New scoring PDF report. Only shows scores and comments.
- Comments shown in production and scoring report
- Use Arrow keys job job list to highlight and calculate measurements
- Added Heidelberg Prinect Measured Curves export.
- Trend graphs show the change from makeready to production.
- Choice of how grey balance delta is calculated. DeltaH, or Delta a,b
- Grey balance target is scaled from the Lab value of paper to the Lab value of black, and not just based on the a,b value of the black ink tint.
- Contact information taken from user addressbook on mac.

[BETA FIXES]
- Hot folders now work
- Overprint lab setting is honored in standards
- Window positions remembering positions
- Standard Users re-opening up old jobs with measure and import enabled
- Intellitrax and Easytrax SVF spot colour support
- Standard operator privileges in new job window
- window colour background on Mac
- Out of Bounds error reading pressSIGN standards installed in version 2.
- Error Configuring Server error during installation because of Windows Security Policy
- No default standards appearing during first install
- 6/7 patch colour bar has correct repeat
- Centre mark is now centred for all colour bar lengths
- .icv extension removed from standards list
- Skipping new operator creation work for existing databases
- Fixed some eror configuring server / Error Restarting server problems installing the database on Windows.
- Measure window cannot me minimised any more
- Measuring a solid in dot area crash fixed.
- Measure window cannot be minimised.

3.1.3
[New Features]
- Updated colour bar recognition checks so there should be less 'unable to recognise layout' errors
- Updated German Translation
- Updated CGATS parsing to work with measurements that contain only spectral data

[Fixes]
- Removed some double beeps when starting a strip with an Eye One

3.1.2
[FIXES]
- Critical fix reloading jobs that contain spectral data
- fix for importing image control spectral data

3.1.1
[New Features]
- Spectral reflectance preview in the colour inspector window. This is shown only when spectral information is available.

[Fixes]
- Fixed creating the database in a location with a double byte character in the path

3.1.0
[New Features]
- X-Rite EasyTrax instrument Support.
- Use the EasyTrax in scan and spot mode.
- Create Heidelberg Image Control colour bar definition files for pressSIGN colour bars
- Create Intellitrax / PDCS-II(Komori) colour bar definition files for pressSIGN colour bars
- Measurement lists when looking at trend windows are expanded
- Full sheet view shows ink adjustment as arrows
- Increased accuracy of curve smothing algorithm.
- Speed increase opening jobs saved in the database
- Add measurements into a job from database or files streamlined.
- Device strip preview. Shows what the device measured to help diagnose measurement and bar recognition errors.

[FIXES]
- Corrected Export format selection for several Languages
- Colour Inspector and job window should hide and show correctly.
- Fixed Colour Inspector shortcut missing
- Fixed some spot/strip measurement problems and using an EasyTrax to measure paper while adding a standard from an ICC profile
- Added Correct help and images for each measurement Device
- Fixed Techkon Spectrodrive scan measurements
- Improved colour bar recognition and recovery from a missed measurement
- Various graphics bugs
- Density changed to absolute, not relative if there was a corrput preferences file.
- Density values not shown in full sheet view when using absolute density values.
- Fixed problem resetting database
- Fixed individual measurement dates when opening an old job.
- Fixed selecting a network database during install
- Fixed some instances where measurement times were displayed as 1904
- Fixed display of scoring in some languages.
- Changed some measurement numbering to make sure names are unique even if some are deleted.
- Fixed sorting by date when importing measurements from the database
- Changed some internal memory handling
- Fixed some display bugs on Snow Leopard
- Fixed closing and reopening job window with measurements keeps the list
- Fixed some window layering problems on Windows Vista
- Fixed using close to quit pressSIGN
- Fixed some date errors importing measurements from other jobs
- Fixed date errors exporting measurements
- Fixed patches inuse problem with exporting a job
- Fixed pressSIGN quitting fully when closing the main window
- The target standard list updates correctly when adding a new standard from the New Job Window.

3.0.5
[NEW FEATURES]
- A New option of a 6/7 patch per zone 5 colour bar in the generator.
- Holding the 'Alts' key whilst in the dot area measurement window can auto select paper

[FIXES]
- The colour bar is now flipped correctly when importing from an Intellitrax or PDCS-II
- The descriptions for the default standards are now correct.
- Drag and drop colours from the measure window colour list on Mac does not cause a crash
- Opening multiple jobs, where a job does not contain any measurements does not reset the list
- Improved recognition of lower tints on full width colour bars which were mistaken for a paper gap when measured manually
- Removed a hang senario in full width colours bars which contained reading errors when measured manually
- Changing standard which had a different TVI setup whilst a job was open updates the target tint information correctly.
- Mac printed labels are scaled correctly

3.0.4
[FIXES]
Re-issue of 3.0.4
- Mac Database in use errors for a new install
- Fixed recognition for the presstek 34DI colour bar
- Improved recognition of colour bars read from right to left with an Eye-One Pro
- Database In Use errors for upgrades from pressSIGN 2 to pressSIGN 3
- Original printers are added correctly for upgrades from pressSIGN 2 to presSIGN 3


3.0.3
[FIXES]
- Usernames and passwords are not case sensitive
- Removed a confirmation when changing preferences or standard whilst no job was open.
- Handling of preferences changing with demo version better
- Toolbar created for demo version correctly on first launch
- The Calibrate Window sometimes remains hidden on Windows Vista/7 if an Eye One is plugged in whilst pressSIGN is minimised
[NEW FEATURES]
- New Colour bar type in generator which allows a 6/7 patch 5 colour bar.

3.0.2
[NEW FEATURES]
- Increased speed overall due to much less disk writing during usage. Massive increase on slower laptop drives.
- Speed increase when measuring long strips and adding to database - especially when measuring right to left.
- Eye One is no longer detected while the open job window is open so the calibrate window will no obscure the open job window.
- Only an administrator operator can change activation code or change location of the database
- Added keyboard shortcuts during launch. Press 'W' to reset window positions.

[FIXES]
- Right clicking on certain window items caused a crash
- Text layout fix for add standard tolerance window.
- Fixed saving dryback data
- Fixed login password check
- Changing preferences for a job after creation but before any measurements are done is recorded in the database correctly.
- When changing the pressSIGN license code in Preferences, the new code is only saved if the license is valid.
- Windows Label Printing (again)
- Fixed Eye One Detection on Windows after first launch without the measure window open.

3.0.1
[NEW FEATURES]
- When Adding measurements from file, mis-measurements because of a high delta E can be ignored, so if Image Control or Intellitrax are set up with the wrong colour bar it is shown.
- Updated Demo Database
- When in hot folder mode, pressSIGN deletes or moves any preview files (jpg, or bmp) in the same way as the measurement files.
- Added bmp into the list of file types to ignore in a hot folder.
- Updated HASP dongle driver for windows 7 compatibility.
- A standard operator is no longer able to delete another operators measurements from a job
- When moving hot folder files, the extension is preserved and the unique identifier is added before the extension
[FIXES]
- Fixed Overprint Lab values always being used in standards.
- Removed a debug message when adding an ink and paper.
- Fixed Label printing on Windows.
- Fixed a zero score shown in PDF files when removing individual patches from the full sheet view
- Fixed no jobs showing in open job window in Chinese
- Changed some score alignments in add standard window
- Fixed a 'no jobs found' error when importing measurements from the database and selecting a job that contains no measurements.
- Fixed a job not listed if the client is added from the new job window

3.0.0.b843
- Fixed Bar Graphics Bug
- The Info window shows when the de values are averaged (to differentiate between the de of the average and average of the de)

3.0.0.b842
- Increased speed updating a job after a preferences change
- Fixed an sorting error in open job window
- Uses GDI+ on Windows giving smoother graphics

3.0.0.b840
- Fixed saving dryback values in the database
- Added Trueflow export curve format
- Added Image control sheet count. Automatically goes into makeready / production mode.
- Updated Italian Translation
- Updated SPanish Translation
- Updated Simplified Chinese Translation
- Updated demo database with new dryback data

3.0.0.b832
- Version 3 Manual Included
- Grey balance target Lab values are updated when averaging correctly. It does not affect the delta H calculation or scores.

3.0.0b829
- Holding the shift key while clicking on a trend window will highlight those measurements in addition to any others already selected.
- Double clicking on the Primary de Distribution and Score distribution trend windows highlights all those measurements that match.
- Added error checking for missing text encodings when generating a PDF colour bar.
- Fixed percentile calculation error.

3.0.0.b828
- Differences between an administrator operator and a standard user have been implemented. A Standard user cannot delete the following: jobs, standards, ink and papers, saved queries.
- Activation codes are trimmed and made into capitals before validating. This should help invalid code errors when pasting the code into the code field.
- Added Italian Translation Version 3 additions.
- Still testing an encoding error in chinese systems generating a PDF colour bar.

3.0.0.b821
- When parsing Intellitrax files, pressSIGN auto detects the CMYK units that follow 'CUSTOM C(', 'CUSTOM M(' etc style
- When parsing Intellitrax files, pressSIGN assumes that the Grey25-25-25 patches are actually the GB25 patches. 50 and 75 work the same way. These numbers still have to match the expected black tints though.
- Changed the encoding used when generating a PDF colour bar

3.0.0.b820
- Updated demo database
- Online update checks for version 3 only
- Fixed online update crash if there is no network connection of any kind.
- Added a helpful message in the set defaults windows which gives the default username and password. Username = 'presssign', no password.
- forgotten passwords can be reset by trying in a username 'reset' and your activation code as the password.

3.0.0.b815
- Added demo database. pressSIGN 3 demo has several example jobs showing different aspects of pressSIGN. The demo cannot create new jobs, or measure, but is fully functional otherwise.
- Fixed saving dryback issue from 3.0.0.b810
- Added 2 new trend graphs to main screen and PDF - OVerprint Lab dE and Trap values.
- You can no longer create a job in pressSIGN Trends. There was no point in doing so because no measurements could be taken.

3.0.0.b811
- Cleaned up PDF trend windows (duplicate axis drawn on some windows)
- Added colour preview of the CMYK and RGB overprints to the PDF

3.0.0.b810
- Axis labels on Trend windows
- deltaH for grey balance calculation when averaging fixed

3.0.0.b808 fixes
- Request for the database location on new install
- incorrect labels on trend windows
- nilObject exporting a job
- missing density estimates
- Changing between strip and single mode with eye one
- Text size changes for PDF generation to stop text wrapping
- Removing measurements from the job list now works for permanent and temporary removal.
- Trend windows updated correctly after removing measurements.
- Grey balance calculation from ICC profile fixed

3.0.0
[NEW FEATURES]
- Trend Information for pressSIGN PRO.
- Trend including all scoring criteria, plus Primary de, CMYK TVI and grey balance values
- Trend information can be displayed in the main window and in permanent floating windows
- Database backend with advanced searching. Search by operator, time, standard, press, score amy many more
- Open multiple jobs at the same time
- Auto generating colour bar can now generate a 5 colour bar.
- Colour bar generator can generate EPS files.
- Multiple screen support.

2.6
[NEW FEATURES]
- Full press sheet view
- Importing ICC profile functionality greatly enhanced; Measure Paper White & resave profile.
- Estimated Magenta checks hue/chroma and lightness

2.3.2
[NEW FEATURES]
- Image Control 5 Colour Bar for pressSIGN PRO
- All URL links are now to www.presssign.com

[FIXES]
- Black ink adjustment shown if the measured deltae >16

2.3.1
[NEW FEATURES]
- More feedback during calibration of Eye-One Pro
- Import ICC Profile shows more information about the ICC Profile
- Reduced Memory footprint & improved interface efficiency
- Calibrate button only available now for single mode, as strip mode is calculated automatically
- Open Job defaults to the job folder location

[FIXES]
- Crashing after measurent on Windows
- Possible Wrong mode(strip/single) set on Eye-One if the calibration failed.


2.3.0
[NEW FEATURES]
- Digital Information IZMOve support in pressSIGN PRO. Set hot folder to the IZMove job folder to import.
- Magenta and Cyan ink adjustments are less affected by inks that are too light. The overall effect is that the estimated targets are likely to be lower.
- The upper and lower tolerances for the TVI curves are shown in the TVI diagram on the main window when viewing single inks.

2.2.6
[FIXES]
- Dot area calculations and auto ink measurements using an Eye-One PRO are now working again
- Dryback calculations when in pressSIGN PRO display the wet densities in standard and closest wet density as indended
- Fixed missing measurements from the job window
- Removed the double beep before measurement when using an Eye-One PRO.

2.2.5
[NEW FEATURES]
- Smarter recognition of CMYK ink colours for PDCS-II and Intellitrax.
- Smarter recognition of CMYK ink unit positions for perfecting presses for PDCS-II and Intellitrax
[FIXES]
- Crash plugging in an Eye-One on Mac
- Image Control colour bar tints corrected in download.

2.2.4
[FIXES]
- Label printing layout adjusted slightly to now show start and end times correctly.
- Fixed blank label problem
- Updated many graphical functions for smoother display
- Updated main window score light size to be consistent for different language / font combinations 
- Updated PDF library to work with more text encodings
- Fixed incorrect dates saved.
- Fixed a small refresh bug (only 2.2.4.384)

2.2.3
[NEW FEATURES]
- Improved speed of curve calculation algorithms
- Improved Magenta Ink adjustment algorithm more varied ink densities and Lab values

2.2.2
[FIXES]
- Fixed a crash when parsing unformatted measurement files
- Improved the colour recognition for CMYK when parsing Komori / Intellitrax files
- Updated Harlequin calibrated curve export format
- Longer activation codes accepted

2.2.1
[NEW FEATURES]
- Mouseover of the hotfolder icon in the job window shows the full path
- Averaging multiple measurements with different density filters is now optional

[FIXES]
- Fixed a visual error for tint patches when adding a gravure standard
- Re-enabled the ISO curves after adding a standard from an ICC profile
- Fixed a crash on quit in pressSIGN PRO
- Longer Activation codes accepted in the defaults window

2.2.0
[NEW FEATURES]
- pressSIGN PRO integration. Requires a pressSIGN PRO dongle to activate.

2.1.3
[NEW FEATURES]
- Option for deleting the files when removing measurements from the job window
- Added the ISO 12647-2 TVI curves as an option when adding a new standard via an ICC profile
[FIXES]
- After exporting to harmony curves the PDF still shows all the tint information, not just 25%, 50% & 75%.
- fixed a NilObject exception after deleting an ink/paper

2.1.2
- Best density no longer shows 0.0 when first launched
- Resolved occasional crash when importing / adding / removing ink and paper settings

2.1.1
- Paper colour is displayed properly when importing a standard from an ICC profile
- Lab values and menus are displayed correctly when opening the add standard window for the first time.

[FIXES]
2.1
[NEW FEATURES]
- Added Flexographic targets - ISO 12647-6
- Added Gravure targets - ISO 12647-4
- Added midtone spread to main display. This is shown in the grey balance area
- Added the ability to create standards from CMYK ICC Profiles
[FIXES]
- PDFs show estimated density correctly using international decimal characters.
- Dryback applied twice to some measurements

2.0.5
[FIXES]
- fixed a MacOS 10.5.2 sheet windows not accepting mouse clicks.

2.0.4
[fixes]
- Fixed a crash after measuring many strips
- Fixed a crash when deleting many measurements
2.0.3
[FIXES]
- Curves redrawn correctly when changing standards with different TVI targets
- Fixed a crash when adding a new ink paper after a new install
- Auto density when measuring dot area more reliable in selecting the correct colour.
- Changed how images are loaded to stop a random picture crash on windows

2.0.2
[FIXES]
- Fixed a crash when auto updating on a Mac
- Curves show correctly on main window for new installs
- Cancelling a new job doesn't disable the measure button.
 
2.0.1
[FIXES]
- Fixed a crash if you started a measurement without creating a job first. You now HAVE to create a job before you perform any measurements (this was the correct workflow)
- Extra checking on the job folder to make sure it exists during writing
s
2.0.0
[NEW FEATURES]
- Averaging of multiple measurements.
- All measurements saved into a folder, which can then be re-opened later
- Sort measurements by Overall, Primary, Overprint etc.
- Choose which measurements to average.
- Combine several jobs to average and choose which of the measurements to use.
- Create you own standards - either from measured data, or by typing in the target values.
- Added paper Lab value as a built in auto target when measuring singularly
- Doubled the speed of calculation for measurements
- New desktop icon
- Adjusted the full colour bars to have a white space at both ends. This makes it easier to read when step-and-repeating the bar across a press sheet
- Job Folders have a configuration file which is read back in when opening old jobs which sets the press / standard and paper automatically
- PDF reports averaged measurements and time range the measurements are done over.
- You can now import / export and add/remove dryback data and press standards from the preferences window and the new job window
- Change job folder in the preferences window
- Using the same name as a previous job gives you the option of automatically renaming the job or replacing the original
- Low cost print buyers version available. Only gives scores / measurements and does not show and adjustments.

[FIXES]
- +inf% ink adjustment when performing single measurements, but without measuring a whole strip
- Line Ending format in exported files
- No ink adjustments showing after importing files
- Extra debugging information included in a dialog box if(!) the software crashes.
- CGATS measurement file always uses decimal point and ignores international setting
- The job window doesn't autoclose when importing a folder of previous measurements on windows
- Updated internal libraries for Eye-One to latest versions.
- Creating new custom standards, and standards from measured data should now work
- Adding new standards updates any existing measurements in the job window
- Measurement times are recorded correctly across platforms / languages
- Job folder is always checked for before writing. Stops a NilObject exception when the job folder no longer exists
- Crash when measuring on Windows
- Creating the default job folder correctly on new installs
- Fixed a calibration window crash
- Cancelling the initializing window from a new install works
- Measuring using single mode no longer adds a measurement automatically after each patch, if a strip had already been read
- Closing the preferences window after adding a standard displays the new curves correctly in the main window.
- Fixed a NilObject Exception on new installs on new operating systems.

1.3.4
[NEW FEATURES]
- International number support implemented when adding standard

[FIXES]
- Dragging colours from the colour list sometimes did not activate on the main strip
- Changing standard name now updates correctly in the measurement window

1.3.3
[FEATURES]
- Improved Eye-One calibration procedure
- Windows updater now finds a unique folder to decompress new version into.

[FIXES]
- Single measurement mode - updating main window for dE, best and range when double clicking and dragging colours onto the strip
- Fixed a crash when clicking outside the strip when in single measurement mode.
- Fixed a 'Please choose ColorSyncScripting' error on launching on a Mac.
- Measuring Spot Colour Solid ink density dot area no longer resets CMYK density.
- Random Windows crash after using the auto update
- Windows crash adding standard

1.3.2
[FIXES]
Measuring a strip in single measurement mode.
Automatic Updater fixes.
Mac version upgrade - error initialising

1.3.1.210
[FIXES]
Automatic Updating. If you are updating from within the appication, then please visit www.bodoni.co.uk/presssign.php to download

1.3.0
[FIXES]
- Estimated ink density cleared when creating a new job
- PDF estimated ink densituy recorded correctly
- Error creating PDF
- Updated PDF Manual with 1.3 features
- Updated Eye-One calibration procedure.

1.3 BPIF CD Version
[NEW FEATURES]
- New full colour bar strip available. Can be read either singlely or as a strip. Designed to step and repeat across a whole press sheet, and replace any existing colour bar.
- Density Range shown on main window. Shows the minimum and maximum density range that is within the primary E tolerance.
Added ISO 12647-2:2007 (2004 Amd 1) as a standard. These have updated Overprint Lab values, and a slightly adjusted L value for yellow on paper types 1 & 2
- Added the ability to measure a strip in spot mode.
- Single measure mode Features:
   - Displays Lab, LCh, density for any given reading.
   - Measuring dot area.
   - Apply dryback to individual solid measurements and see Lab and E values.
   - Visually see colour differences on screen between any Lab values.
- Colour List. All measurements are available for use in the pressSIGN chart, so you can combine a several separate measurements into a single strip for calculation
- Mac version - uses monitor profile for more accurate previews on screen.
- PDF dot gain information page as job information and score included.
- 
[FIXES]
- Estimated cyan and black density when very low
- Hue changes in dryback for angles which change from near 360 to near 0


1.2
[NEW FEATURES]
- Vista Compatible i1 drivers.
- Mac Universal Binary version.
- Add and remove printer names, and dryback information from the job settings window.
- You can create a new ink / paper type, when clicking 'update dryback' whilst measuring a wet press sheet.
- Newer, easier to read strips (both narrow, and standard strips)

- Consolidated press standards to ISO 12647-2 paper types / GraCol 7 paper grades, so there is no need to differentiate between sheetfed and web press types.
- Web press coated paper setting has been renamed as lightweight woodfree coated paper type 3
- Selecting paper types automatically sets the recommended TVI curves for CMY & K

[FIXES]
- Changing density filter on a Mac now works (Used to get a unable to set density filter error)
- CMYK primary scoring method is checked correctly when creating a new scoring system.
- Grey balance for 50%K has been corrected in each strip (pressSIGN_v21) (1% more yellow)

1.1
[NEW FEATURES]
- New scoring system introduced. How a press is scored is completely configurable when adding a standard.
- GRACol G7 targets included
- SWOP 2006 targets included
- ISO 12647-3 targets included
- Dryback information can be exported or imported from different installations.
- Press standards can imported and exported.
- Redesigned the PDF layout

[FIXES]
- Pass / Fail message in PDF when not checking overprint Lab values fixed.
- Improved Ink adjustment algorithm
- Improved estimated density if the ink density is too high.

1.0.6
[FIXES]
- Disappearing Main Window

1.0.5
[FIXES]
- Resolved 'Error Setting Compatibility in document scope' error
- Windows - Overprint Lab tolerances in PDF are reported correctly.

1.0.4
VERY IMPORTANT:

- Please use the new Charts included with this version. The 25%, 50% & 75% grey balance patches have been updated using the FOGRA39 dataset using ECI/bvdm Gray Control Strip method
There is no need to recalibrate the press to use the new chart. The new chart is labelled pressSIGN_v2 and pressSIGN_Narrow_v2
It should be much easier to pass the 75% grey balance patch.

[NEW FEATURES]
- The pressSIGN chart is now available as tif, eps and pdf versions.
- Any included press targets are installed automatically, overwriting any previous versions. Custom Press targets are still retained, however.
- The Colour Info window is movable on Mac and PC
- Window positions are saved between sessions
- Lab values are displayed in the PDF for the CMYK primaries and Overprint.
- Default job name is now the press name
- Added RAMPage to the export tints file formats
- Added Harmony (Prinergy) to the export tints file formats
- Text file line endings format can set from the Preferences Window.

[FIXES]
- Window Minimize and Restore now works as expected on Windows.
- The Density filter can be changed without restarting the software
- Setting Paper colour as an optional part of the standard fixed.

5/2/2007
