OdO

HELP FILES SEEQ ONE





this is the filter adsrs sequencer part of the synth
every step has his own adsr decay
in the LCD you can choose the steps ( now set at 16 Steps)
you can also choose the speed of the sequencer ( now set at 1/16)
you also see the text normal in the LCD
when you click on the button you see the text invert
it will say that the filter adsrs are inverterd
if you do not here any sound turn up the filter cutoff





this is the glider effect part of the synth
it`s not a normal glide ;)

the slicers are the lenght of the glider effect
you can choose on off for the glide effect X is off ON is ;)
the buttons you see
gray goes down and black up

and again you see a LCD with speed and steps
the normal function = the glide effect
but you can also select filter
or off function

don`t have much to say about this part ;)
but if you want to select a note do not click on it slide over with your mouse
this is a much better and faster way
and i didn`t use it in the beta

 

volume part of synth :)
when the buttons are black ther is no change
when gray you can change the volume with the mix slider

tip:
if you set the speed 1/32 an the mix slider open then you have a trancegate effect



cut = cutoff
Reso= Resonance

depth = depth of (LFO) filter
in the LCD free starts at any point.
sync starts when hitting a key
and you can select the speeds
+ the low hi band 4pole and 8pole filters

oct=Octave
tune=detune
vol=volume
(you can only choose saw or square)




nothing to say about this
maybe not a normal vibrato ;)


just distortion


3 extra LFO parts :)

the first one is a normal lfo
again in the LCD
you can choose speed
sync or free
the wave you want

LFO to : resonance(reso)
cutoff
filter envelopes (env f)
goes to envelope filter decay part of the synth
----------------------------------------------------------------
the other two

you can see that there two (lfos) with a decay :)
i use it mainy for a glide effect (again not a normal glide)
when up is selected its a normal decay down is a inverted

in the LCD you can choose the speed
and if you wanted to start sync or free

LFO goes to :
resonance
filter cutoff
Gilder (osc)
and
Volume osc 2 and 3

about VOLUME to osc 2 and 3
if you want to use this first turn the volumes in the osc stuff part of the synth down
and select up in the LCD

also if you use resonace you need to select up


the delay :)

fb=feedback
in LCD you see 1/4 -a thats the speed of the delay part A
same with B
1/8cr = the speed of the crosser :)

THATS ALL :)



special thanks to : sickle666
and ouroboros
for making some nice presets :)